Jeep Wrangler Control Arm Replacement Cost

Replace a worn control arm or its bushings.

$460 – $1,150

Typical labor: 1.5 to 3 hours per side

Get Exact Estimate for My Wrangler

Parts vs Labor

50% / 50%

Typical share of total cost

Labor Time

1.5 to 3 hours per side

At a typical shop

Difficulty

Advanced DIY

3 of 5 for the Jeep Wrangler

Estimate based on Jeep Wrangler parts and labor adjustments versus the national average. Your exact cost depends on year, trim, mileage, and shop. Get a free personalized AI estimate above.

Why Jeep Wrangler Owners See This Pricing

Wranglers are easy to work on but solid-axle suspension and 4WD components cost more.

For reference, the national average for control arm replacement on a typical passenger vehicle is $400 to $1,000. The Jeep Wrangler runs about +15% versus that baseline.

Common Symptoms in the Jeep Wrangler

Clunking over bumps

Steering wander or pull

Uneven tire wear

Vibration in the steering wheel

What It Is

Control arms are the suspension links that hold each wheel in proper position. They have bushings and ball joints that wear out.

Why It Matters

Worn control arms cause unsafe handling and chew through tires.

How to Save Money on Jeep Wrangler Control Arm Replacement

Loaded control arms (with ball joint and bushings preinstalled) cost a bit more but save hours of labor
Always do an alignment after replacing a control arm

Often Done Together

Shops commonly pair control arm replacement with these jobs to save on overlapping labor:

Wheel Alignment

$92 – $230

Strut or Shock Replacement

$690 – $1,725

Got a Quote from a Local Shop?

Check if your Jeep Wrangler quote is fair before paying. Get a free line-by-line AI estimate for your exact year and trim in under a minute, then compare.

Check My Quote Free

Frequently Asked Questions

Can I replace just the bushings instead?

Sometimes, but pressing bushings out requires special tools and the labor often costs more than buying a new loaded arm.